Stairfriend – Curved Staircase Chair lift
January 1, 2019
Show all

Step Saver – Straight Staircase Chair lift



The Step Saver stair chair is a lower-cost alternative to a residential accessibility elevator, takes less than half a day to install and leaves enough room on the staircase for others to walk by. Safe and sturdy, the Step Saver will take you up or down straight stairways smoothly and comfortably and can be installed on either side of your staircase.

This classic model comes with a slew of great features, including two remote controls, a foldable footrest, a flip-up seat that swivels and locks in position, two obstruction sensors and an anti-skid foot rest. Its neutral colour allows it to blend in with any decor. Because it’s battery-powered, the Step Saver will even work during a power outage. Although the seat cover is available in both cloth and vinyl, many prefer this last option as it facilitates transfer and cleaning.


  • Rigid and compact aluminum extrusion rail
  • Support posts anchored to stair treads (Not mounted on wall)
  • 300 lb (136 kg) capacity
  • “Almond beige” seat and rail
  • Adjustable width between armrests from 18″ to 21″ wide (457 to 533mm)
  • 1/2 hp, 24 VDC motor
  • Battery-powered 24-volt motor
  • Pair of 12-volt, maintenance-free batteries
  • Continuous charge “anywhere on the rail” system.
  • Electronic controller with soft start and soft stop
  • Fused control circuit
  • Wireless infrared call-send controls at both landings
  • Continuous pressure buttons
  • Aluminum rail on 6″ (152 mm) from wall
  • 3″ (76 mm) rail overhang at top landing with seat height of 18″ (457mm)
  • 22 1/2″ (572 mm) seat height at bottom landing
  • Adjustable seat height
  • Unit is completely reversible on site for quick installation
  • Lateral adjustment on footrest for uneven treads
  • Foldable footrest, seat and padded armrests
  • Seat that swivels and locks in 45° and 90° positions both directions
  • Seatbelt and seat swivel switch
  • ABS plastic covers
  • Obstacle sensors under footrest and on carriage



  • Application – Indoor straight run stairway
  • Maximum Travel – 32 ft (9,754 mm)
  • Speed – 20 fpm (0.1 m/s) approx.
  • Angle of incline – 25º to 50º
  • Rated load – 300 lbs (136 kg)
  • Drive system – Rack and pinion
  • Motor – ½ hp, 24 VDC. Charges on standard household current 120VAC, 50Hz at top or bottom landing
  • Standard color – Beige carriage and upholstery, grey or beige rail finish Backed by the Savaria Concord Limited Warranty wich covers the repair or replacement of any defective parts for a period of 36 months from date of shipment
Reviews (0)


There are no reviews yet.

Be the first to review “Step Saver – Straight Staircase Chair lift”

Your email address will not be published. Required fields are marked *